Section 1 – Create and Deploy vSphere 6.x Infrastructure Components

Objective 1.1 – Perform Advanced ESXi Host Configuration

• Configure and Manage Auto Deploy configurations
• Configure Kernel Boot Parameters for scripted install according to a deployment plan
• Configure Advanced System Settings according to a deployment plan
• Configure Syslog Settings On Esxi host
• Manage/Edit the Core Dump configuration of an ESXi host

Objective 1.2 – Deploy and Configure Core Management Infrastructure Components

• Deploy and Configure a Platform Services Controller
• Determine use case for embedded vs external PSC
• Re-point a vCenter Server Appliance to another External PSC
• Deploy vCenter Server
• Configure Identity Sources for Single Sign-On
• Configure Enhanced Link Mode
• Configure Identity Sources for Single Sign-On
• Managing vCenter Server advanced configurations
• List services registered with Single Sign-on

Objective 1.3 – Deploy and Configure Update Manager Components

• Installing vSphere Update Manager and Update Manager Download Service
• Configure UMDS for VUM
• Perform VUM orchestrated vSphere upgrades
• Troubleshoot Update Manager problem areas and issues

Objective 1.4 – Perform Advanced Virtual Machine Configurations

• Tune Virtual Machine disk controller configurations according to a deployment plan
• Configure .vmx

In this post we will see how to migrate from vSphere Standard Swith to vSphere Distributed Switch. Let’s get started.

Before performing any migration, make sure you have a vDS deployed and fully configured i.e portgroups created, uplinks created, appropriate uplinks placed in respective portgroups.

Here is a review of my environment.

1: I have a vDS created and different port groups for separation of duties. 

2: Uplinks created and meaningfully named.

3: Teaming and Failover configured. Each of the portgroup in my lab have only one active uplink. Rest of them I have placed in unused. 

4: And this is how the networking is layout for the host which I will be migrating to vDS. This host have 2 vSS.

• vSwitch0 have Management and vMotion VMkernel portgroup along with a VM Network portgroup to which my vCSA is connected.

• vSwitch1 have 2 portgroups configured for iSCSI storage connectivity. Port binding is enabled here to achieve multipathing. 

In this post we will cover following topics:

• Create and manage vSS components according to a deployment plan:
  • VMkernel ports on standard switches
  • Advanced vSS settings
• Configure TCP/IP stack on a host
• Create a custom TCP/IP stack
• Configure and analyze vSS settings using command line tools

Lets get started by going through each topic one by one.

                                          Create and Manage vSphere Standard Switch

When Esxi is installed, a standard switch aka vSS is also created by default. Working mechanism of a standard switch is very similar to a physical switch in the sense that a standard switch works at layer 2, forwards frames to other switch ports based on the MAC address, and supports features such as VLANs and port channels.

Esxi host physical NIC’s serves as uplinks to the standard switches and through these uplinks vSS communicate with the rest of the network. A vSS provide the network connectivity:

• between virtual machines within the same ESXi host.

I haven’t blogged for quite a bit of time as I was busy in my VCAP6-Deploy exam and finally I passed my exam last saturday. There is a lot of things which I want to share about my exam experience and the things I learned during my preprations. 

I passed my VCP 6 exam back in june 2017 and since then a strong feeling about going for VCAP exam started darting every now and then in my mind. I have few certifications but none of them were advance level and this thought pumped me up for going for this exam.

I work as a operations engineer in OVH vCloud Air division and interacts with virtualization/Networking/Storage things on day to day basis and this certainly was an advantage as I already have hands on few of the topics mentioned in VCAP exam blueprint. 

My preparation

I started my preparation by downloading the VCAP6-Deploy exam blueprint and had a rough look on all the objectives.… Read More

What is Lun Masking?

LUN masking is a way to control which LUNs to be made visible to Esxi host. If you have a storage array with multiple LUN’s and you want that an Esxi host should only be seeing a subset of LUN’s and not all, you can use lun masking technique.

Lun masking is totally opposite of lun zoning, where the storage array configuration determines which LUNs are visible to a host.

Last year I was doing a lab on vSphere Replication setup and wanted a subset of LUN’s from my openfiler appliance to be visible in my source site and remaining lun’s in my protected site. That was the first time when I felt need for masking the paths to storage array so that all my Esxi host from both sites, should not be seeing/mounting all the Lun’s which I created on my openfiler appliance.

Although I ended up doing the configuration change on openfiler side (same like zoning), but the idea remained always in my mind to use Lun masking someday.… Read More

Objective 2.3 of VCAP6-Deploy exam covers following topics

• Analyze and resolve storage multi-pathing and failover issues
• Troubleshoot storage device connectivity
• Analyze and resolve Virtual SAN configuration issues
• Troubleshoot iSCSI connectivity issues
• Analyze and resolve NFS issues
• Troubleshoot RDM issues

Lets discuss each topic one by one

                               Analyze and resolve storage multi-pathing and failover issues

There can be hundreds of reason for multipathing and failover issues and troubleshooting these issues comes with experience only. Issues with multipathing can be because of issues on storage side (SAN Switch, Fibre configuration etc)  or from vSphere side. In this post we will focus only on vSphere side troubleshooting.

In my lab I am using openfiler appliance for shared storage and my vSphere hosts are configured to use software iSCSI to reach to openfiler. Each host has 2 physical adapters mapped to two disting portgroups configured for iSCSI connection and both portgroups are complaint with iSCSI Port Binding settings

VMware KB-1027963 explains in great details about storage path failover sequence in vSphere. … Read More