3 weeks back I attempted my VCAP-NV  (3V0-643) exam and passed with 408 marks. This was my second attempt, in my first attempt I failed with 282 marks as I left too many routing questions as I was not very much comfortable with them.

I interacts with NSX everyday as its core of our Networking in production and my job is to troubleshoot everyday network issues and this helped me a lot during my preparation. 

VCAP6-NV exam have 23 questions and you have total of 3.5 hours to finish the exam. But believe me 3.5 hours are not enough as there are few questions which are very lengthy and you may have to read those questions 2-3 times to make sure you have understood the requirements completely.

Thumb rule for passing this exam is to stick with the exam blueprint and practice each and every topic mentioned in blueprint. The exam is designed in such a way that it covers 90% topics of the blueprint.… Read More

Section 1 – Prepare VMware NSX Infrastructure

Objective 1.1 – Deploy VMware NSX Infrastructure components

Objective 1.2 – Prepare Host Clusters for Network Virtualization

Objective 1.3 – Configure and Manage Transport Zones

Section 2 – Create and Manage VMware NSX Virtual Networks

Objective 2.1 – Create and Manage Logical Switches

Objective 2.2 – Configure and Manage Layer 2 Bridging

Objective 2.3 – Configure and Manage Routing

Section 3 – Deploy and Manage VMware NSX Network Services

Objective 3.1 – Configure and Manage Logical Load Balancing

Objective 3.2 – Configure and Manage Logical Virtual Private Networks (VPNs)

• Configure IPSec VPN service to enable site to site communication
• Configure SSL VPN service to allow remote users to access private networks
• Configure L2 VPN service to stretch multiple logical networks across geographical sites

Objective 3.3 – Configure and Manage Additional VMware NSX Edge Services

Section 4 – Secure a vSphere Data Center with VMware NSX

Objective 4.1 – Configure and Manage Logical Firewall Services

Objective 4.2 – Configure and Manage Service Composer

Section 5 – Perform Operational Management of a VMware NSX Implementation

Objective 5.1 – Backup and Restore Network Configurations

• Schedule/Backup/Restore NSX Manager data
• Export/Restore vSphere Distributed Switch configuration
• Export/Import Service Composer profiles
• Save/Export/Import/Load Distributed Firewall configurations

Objective 5.2 – Monitor a VMware NSX Implementation

Objective 5.3 – Configure and Manage Role Based Access Control

Section 6 – Configure Cross vCenter Networking and Security

Objective 6.1 – Configure Cross vCenter VMware NSX infrastructure components

Objective 6.2 – Configure and Manage Universal Logical Network Objects

Objective 6.3 – Configure and Manage Universal Logical Security Objects

Section 7 – Perform Advanced VMware NSX Troubleshooting

Objective 7.1 – Troubleshoot Common VMware NSX Installation/Configuration Issues

Objective 7.2 – Troubleshoot VMware NSX Connectivity Issues

Objective 7.3 – Troubleshoot VMware NSX Edge Services Issues

Section 8 – Utilize API Commands to Manage a VMware NSX Deployment

Objective 8.1 – Administer and Execute calls using the VMware NSX vSphere API

Tools

NSX Installation Guide

NSX Administration Guide

VMware NSX Brownfield Deployment Guide

VMware NSX Network Virtualization Design Guide

NSX Command Line Interface Reference Guide

NSX Troubleshooting Guide

NSX 6.2 API Guide

 

… Read More

Prepare vSphere Distributed Switching for NSX

NSX works only with distributed switch and not with standard switches. Before you deploy NSX and start configuring stuffs, you have to make sure that you have fully configured the VDS and have migrated portgroups/uplinks etc from VSS to VDS.

One of the most important requirement for NSX is to set the minimum MTU at VDS to 1600 bytes. So before you start adding hosts to VDS, make sure that appropriate MTU is already configured on VDS.

The requirement for 1600 bytes is due to the original Ethernet frame being wrapped (encapsulated) with additional headers for VXLAN, UDP and IP; thus increasing its size, and is now called a VXLAN Encapsulated Frame.

To verify/configure MTU on vDS, select the vDS from list and navigate to Manage > Settings > Properties tab and hit edit button.

Under ‘Advanced’ tab, change the MTU to 1600 and hit OK.… Read More

Deploy the NSX Manager Virtual Appliance

Deploying NSX Manager is a straight forward task like deploying any other appliance from ova file. I have already covered the steps of deployment in one of my old post so I am not repeating the steps of deployment again.

Integrate the NSX Manager with vCenter Server

Once NSX Manager is deployed, next task is to integrate it with vCenter server. To do so, login to NSX Manager UI (https://NSX-FQDN) and from home page click on Manage vCenter Registration. 

Under ‘NSX Management Service’, click on edit button for vCenter Server.

Specify vCenter Server IP/FQDN and credentials via which NSX will communicate with vCenter server. User account used can be vCenter server local administrator or a service account.

Important: If you are using a service account for NSX registration with vCenter, make sure that account is added to Administrators group in vCenter in advance before doing the registration.… Read More

What is REST API?

if you are new to Rest API and wondering what exactly it is and what do we do using API, then I would recommend reading this article first before moving down further in this post. Also I found this article very useful to understand how Rest API works.

Before starting the topics of objective 8.1, I want to pen down few facts about Rest API.

• The NSX Manager accepts API requests on TCP port 443 over HTTP application protocol.
• You need a rest client to execute Rest API calls. There are plenty of clients available such as Postman and CURL (linux based). You can also integrate the Rest client in your browser. For mozilla firefox you can add this extension and for chrome you can add this
• Rest API’s are usually used when you can’t do something from GUI (because there is no option available) or when you want to automate stuffs using scripting or some other tools.

… Read More

Troubleshoot VPN service issues

There are 3 types of VPN which you can configure on NSX edges:

• SSL-VPN Plus
• IPSec VPN
• L2 VPN

Lets start with troubleshooting IPSec VPN.

To troubleshoot any VPN issues, you should have knowledge of how to configure a VPN service so that you can verify that issue is not because of a mis-configured settings. To review the implementation and configuration of the IPSec VPN service refer to article

To run troubleshooting commands on the ESG where IPSec VPN service is configured, connect to the edge via SSH.

To view full list of commands for ipsec, run command: show service ipsec ? 

Check IPSec VPN service status: show service ipsec

To see IPSec configuration  run command: show config ipsec

Additionally you can configure the ESG (where IPSec is configured) to forward logs to a centralized syslog server.

Once syslog server is configured on ESG, you will find following log files forwarded to the syslog server.… Read More

Monitor and analyze virtual machine traffic with Flow Monitoring

Flow monitoring is used to capture ingress/egress traffic of VM’s in a NSX environment. Flow monitoring is disabled by default and you need to enable it before you can use this tool. Once Flow monitoring is enabled, you need to wait for some time to let this tool gather data about your vSphere environment (much like how vROPS gather data before generating reports/recommendations etc)

Flow monitoring can be enabled by navigating to Networking & Security > Flow Monitoring > Configuration and clicking on Enable. 

Under Flow Exclusion, you can exclude any object which you don’t want to monitor. For example, you can select option “destination” under Exclusion Settings and click on + button to specify a destination container for which flow monitoring data won’t be gathered. 

Flow Monitoring Dashboard

Here you can see Top Flows, Top Destinations and Top Sources of your environment. … Read More